Typical applications:
Engineering plastics, masterbatch, filler, TPE, TPR, TPV, direct extrusion
ATE series parallel twin screw extruder is driven by motor, torque distribution gearbox, processing part, temperature control device, mold part and downstream grain cutting system.
ATE twin screw extruder adopts the principle of modular design and standardized production of components, so as to present stable and reliable performance.
With the principle of modularization, ATE series extruding machines can provide highly customizable solutions according to customers’ process and special requirements. Based on different output torque levels, there are two types of ATE extruders: basic type and efficiency type.
ATE co-rotating twin screw extrusion machinery combines a variety of cutting systems, such as water strands cutting system, die surface cutting system and underwater cutting system.
Relay control and PLC control are both used in ATE electrical control system. All key electrical components are European branded to ensure significant stable performance of the control system.
ABS Crushed Material
Auto Parts
Crushed Blue Barrel
Crushed LDPE Pipe
Crushed POM Material
Engineering Plastics
HDPE flakes
Injection Molded Parts
PET Bottle Flakes
PET Bottle Flakes
PP PE Color Masterbatch
PS Crushed Material
ABS Crushed Material
Auto Parts
Crushed Blue Barrel
Crushed LDPE Pipe
Crushed POM Material
Engineering Plastics
HDPE flakes
Injection Molded Parts
PET Bottle Flakes
PET Bottle Flakes
PP PE Color Masterbatch
PS Crushed Material
The twin-screw design provides efficient mixing and shearing, suitable for blending and modification of a variety of plastics.
The equipment is equipped with a precise temperature control system to ensure that the plastic is modified at the optimal temperature.
The twin-screw granulator can easily add up to 50% or more fillers, such as glass fiber, mineral fillers, etc.
The formula can be quickly changed and different modified plastics can be produced to adapt to market changes.
The modern control system makes operation easier and reduces the skill requirements of the operator.
The efficient granulation process reduces energy consumption and promotes the recycling and reuse of plastics, which meets environmental protection requirements.
Lumps or thick flakes after crushed, conveyed into the single screw extruder by screw loader, then, compress, plasticize in the extruder and removed volatiles and moisture by vacuum system, after filtering through the filtration system, to pelletize into granules. Depending on the different screw diameters of single screw, the typical capacity can cover from 100kg/h to 1000kg/h,Loading motor power: 2.2 kw. Conveying pipe made with stainless steel material, pipe inner thickness is 2mm, pipe diameter is 102mm.
Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
The gearbox will reduce the motor speed to the screw shafts speed and distributes it to the two output shafts.Low-noise, high torque output.
The twin screw extruder will gently plasticizes the materials.our unique bi-metal twin screw extruder has greater homogenization efficiency and long life time.
Can watch the working state of the machine.
This vacuum system will remove the volatile in the agglomerates and improve the quality of granules. It equipped one-channel value to avoid water back-flowing.
Cast copper and aluminum heater , easy to assemble and disaassemble. Faster heating and low energy waste.
Material of input and output pipes is stainless steel. Manual valves to adjust flowing rate of cooling water; solenoid valves are to control opening and closing of cooling water flowing in.
The Plate type filter is made in a continuous type with two filter plates. There is at least one filter working when the screen is changing.Ring-shaped heater for consistent and stable heating.
This model combines our self-developed self-cleaning filter.The new SCF self-cleaning filtration system makes non-stopping recycling extrusion, especially suitable to highly contaminated materials re-pelletizing. SCF filtration system can handle and remove up to 5% contaminates in the melt flowing, can separate the contaminates as: paper, wood, aluminum, unmelted plastic and rubbers etc.
This is the most appropriate process for the need for better melt filtration and higher production. In the first stage,two or more single screw extruders can be designed for the two-stage pelletizing production line, and then they can enter the second-stage extruder at the same time.
The strip-shaped Melted plastic strands passes through the cooling water tank and is quickly cooled and solidified. During the cooling process, the strip is pulled out by the traction device, maintaining a certain speed and stability. Then, the strip enters the pelletizer and is cut into pellets of a certain length by the rotating cutter.
Highly automatic pelletizing system. It is suitable for materials with high MFI and high production capacity requirements. This system includes pelletizer, valve, conveying pipeline, dewatering vibrating screen, silo.
Final output: plastic particles,the plastic pellets can be re-used for producing high quality plastic products once again.
Service and Support
Contact Us