Aceretech ACS-H Cutter Compactor Recycling Pelletizing System combines the functions of crushing, compacting, plasticization, and pelletizing into one step, making it a reliable and efficient solution for various types of plastic materials.
The ACS-H system can handle plastic film, raffias, filaments, bags, woven bags, and foaming materials with ease. It can produce high-quality pellets that can be directly used in the production line for the blown film, tube extrusion, and injection molding. The system can also process different kinds of plastic materials such as PE, PP, PS, ABS, XPS, EPS, and PVB.
The ACS-H is designed with specially engineered granulators that can quickly and efficiently cut various plastic streams into small uniform flakes or regrinds. These granulators are extremely durable and can handle a variety of applications for plastic recycling such as grinding plastic bottles, films, and small rigid plastics.
The ACS-H pelletizer system is the ultimate solution for plastics recycling and granulation. It can provide higher output with lower energy consumption, saving you time and money. Please read the following features of our ACS-H TM plastic granulating line.
ABS Crushed Material
High-quality double alloy wear-resistant screw, ensuring that the output does not decrease in two years.
The structural design of the single-screw plastic granulator is relatively simple, which is easy to operate and maintain.
It can process a variety of plastic raw materials, such as PP, PE, PET, PVC, etc., with a wide range of applications.
The single-screw plastic granulator operates stably, the output is guaranteed, and it is conducive to improving production efficiency.
The intelligent PLC system realizes full automation, reduces labor costs, and operates stably.
The plastic particles after granulation are uniform and have good gloss, which meets the needs of downstream enterprises.
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is.
Metal detector can be combined with belt conveyor, and can interlock with control system, to warn and stop the system, in case that metal is found in feeding.
It can handle both hard and soft materials. The sliding gate controls the residence time of the material in the compactor to achieve the effect of pre-drying and ensure that clean and dry material enters the barrel. Material that fails to achieve the treatment effect will not be able to enter the next process. PLC accurately controls the quantity of forced feeding materials to ensure production capacity.
Equipped with a high-brightness lamp tube, it is designed for viewing the material situation in the compaction chamber. The lamp tube uses high-quality LED lamp beads, with uniform light and sufficient brightness. The operator can intuitively observe the distribution of materials in the compaction chamber and adjust the feeding speed and compaction degree in time to ensure the smooth progress of the granulation process. In addition, the shell of the lamp tube is made of materials with a high protection level, which effectively prevents dust and moisture from invading, ensuring the long-term stable operation of the lamp tube.
Rotary blades on the knife-disk and fixed blades on the wall cut plastic material into small flakes. Heat which caused by high speed friction pre-heats and dries the flakes and make them shrink.
Arc-shaped plates guide the material down and into the extruder under the centrifugal force of knife disk.
This combined process of size-reduction, pre-heating and compacting enables stable and effective feeding for small bulk density plastics.
The rotating blade and fixed blade cut the material into small flakes. The friction heating generated by the high-speed rotating blades will per-heat and shrink the flakes.
Because of the super L/D ratio, the single stage extruder in the production line can be used as a double- stage extruder. After the middle double-piston type screen filter, another filter can be added at the end. The double filter standard can improve the quality and performance of the final product particles.
Our unique design single screw extruder gently plasticizes and homogenizes the materials. Our bi-metal extruder has great anti-corrosion resistant, wear resistant and long life time.
With double vacuum degassing zones, volatile such as micro-molecules and moisture will be removed efficiency to improve the quality of granules, especially suitable for the heavy printed materials.
System program remote monitoring and transmission system,bluetooth both are available for ACS plastic pelletizing line realizing functions of remote monitoring and information transmission.
Intelligence Start: One button only Following set logistical sequence and materials processing requirement, interlocked system modules can start by “one button only” Intelligence Stop: One button only Each related modular part in ACS system available to shut down by only one button. Emergency Stop Emergency stop function is available in ACS plastic pelletizing system in case that uncertain risk occurred during machine running.
The electrical equipment uses selected European brand electrical components to ensure the efficiency and safety of the equipment during operation.
The equipment power distribution system is reasonably designed, with clear line layout, which effectively reduces the failure rate.
The Plate type filter is made in a continuous type with two filter plates. There is at least one filter working when the screen is changing.Ring-shaped heater for consistent and stable heating.
This model combines our self-developed self-cleaning filter.The new SCF self-cleaning filtration system makes non-stopping recycling extrusion, especially suitable to highly contaminated materials re-pelletizing. SCF filtration system can handle and remove up to 5% contaminates in the melt flowing, can separate the contaminates as: paper, wood, aluminum, unmelted plastic and rubbers etc.
This is the most appropriate process for the need for better melt filtration and higher production. In the first stage,two or more single screw extruders can be designed for the two-stage pelletizing production line, and then they can enter the second-stage extruder at the same time.
The strip-shaped Melted plastic strands passes through the cooling water tank and is quickly cooled and solidified. During the cooling process, the strip is pulled out by the traction device, maintaining a certain speed and stability. Then, the strip enters the pelletizer and is cut into pellets of a certain length by the rotating cutter.
Highly automatic pelletizing system. It is suitable for materials with high MFI and high production capacity requirements. This system includes pelletizer, valve, conveying pipeline, dewatering vibrating screen, silo.
Final output: plastic particles,the plastic pellets can be re-used for producing high quality plastic products once again.
Contact Us